Menu

MLR10

Instrument za merenje impedanse kratkog spoja kod VN transformatora

  • Meri impedansu kratkog spoja kod transformatora
  • Koristan u detekciji i dijagnostici deformacije namotaja
  • Mogućnost merenja u jednofaznim i trofaznim transformatorima
  • Opciono ispitivanje baterija kondenzatora

Megger instrument MLR10 koristi se za merenje reaktanse odvoda i drugih povezanih parametara u visokonaponskim energetskim transformatorima .

Uređaj je dostupan kao samostalna jedinica koja zahteva korišćenje eksternog računara na kome se izvršava Megger-ov vlasnički besplatan softver za MLR10.

MLR10

The MLR10 Software Update will require at least 3 files below.

  • If you know you have Microsoft .Net 4.0 installed on your PC or you are running Windows 10 the DotNetFx40_Full_setup.zip will not be required.
  • Depending on the OS version 32bit or 64bit only one of the MLR10v3d6 files will be needed.
  • The NIDAQ062F0Core.zip will be required.
  •  And the file MLR10_Installation_Guide_1.2.pdf will be required for installation instructions.These instructions are structure to help avoid difficulties after installation. The order of installation and the attachment of equipment to the PC at the right time helps to make a smooth installation.

The Windows 7 MLR10 software will install and run correctly on Windows 7, 8, and 10.

National Instruments Device Drivers for MLR10 DAQ Module
NIDAQ962F0Core.zip
188,2 MB | 16.04.19
Microsoft .NET 4.0 Full Installation
dotNetFx40_Full_setup.zip
776,3 KB | 16.04.19
MLR10 v3.6 32bit Software

 

32 bit version of MLR10 PC Software

MLR10v3d6_Win7_32bit.zip
203,0 MB | 16.04.19
MLR10 V3.6 64bit software
MLR10v3d6_64bit.zip
200,0 MB | 16.04.19