MTO210 ommetar za transformatore je instrument koji se napaja iz mreže, prenosiv je, za rad na terenu, projektovan posebno za bezbedno i tačno merenje DC otpornosti svih vrsta magnetskih namotaja. Ovim instrumentom ispituju se namotaji transformatora i rotacionih mašina, sprovode se merenja otpornosti na vezama, kontaktima i upravljačkim kolima.
Ommetar za transformatore je veoma koristan u ispitivanju namotaja i prelazne otpornosti na kontaktima regulatora napona sa preklopnim kontaktima. Ova aktivnost će proveriti istrošene ili kontakte koji nisu u ravni, pošto će instrument dati indikaciju u slučaju pojave oba ova stanja.
The Megger Valley Forge, USA factory and select Megger Authorized Service Centers (ASCs) can perform updates. If you do not feel capable of performing updates properly, please contact your nearest Megger sales representative for information on where to return your instrument for updates.
Carefully read all instructions and backup your data before performing any updates.
Only update the firmware or software if you are experiencing difficulty with your instrument or if you have a specific need to do so.
Incorrect installation of updates and incomplete updates may cause an error and make the equipment unusable.
If damage occurs from improper updates, customer is responsible for repair costs.
1. Install PowerDB Upgrade (11) [optional]:
a. Download PowerDB 11 (You will be redirected to www.powerdb.com/download)
2. Install Firmware Upgrade:
a. MTO 210 Upgrade Instructions
b. Download MTO 210 Upgrade Installer
1. PowerDB PC Upgrade [Optional]. DO NOT INSTALL THIS ON THE MTO 330:
b. MTO 330 PC Quick Manual
c. MTO 330 Quick Manual
2. Download Brother PocketJet 6 Installer [Accessories]:
a. MTO 330 Brother PocketJet 6 Install Instructions
b. Download MTO 330 Brother PocketJet 6 Installer